Sail Coat 4

Water-Based Urethane to Extend the Life of Your Hang Glider Sail

SKYLINE | SAIL COAT 4 is a liquid plastic coating designed to extend the life of sails by protecting the sailcloth and seams from abrasion while sealing and locking in the stitches. This weather-resistant shield applies easily without requiring cleanup and remains flexible under all natural temperature conditions. Its fast-drying formula ensures reliable performance.

Instructions for Use and Safety Information

Shake well before use

Container Size: 1000 ml, Product Code: 2300-SK-10

Container Size: 500 ml, Product Code: 2300-SK-05

Follow the instructions exactly!

Directions:

1. Clean Sail and Allow to Dry Completely:
   Ensure the surface is free of dirt and moisture before application.
2. Application:
   • Dip a clean brush into the container.
   • Apply moderate pressure while moving the brush tip along the sailcloth and seams to ensure uniform coating.
   • Make sure to apply an adequate quantity.
   Note: Once dry, this coating cannot be reapplied.
3. Drying Time:
   Allow 24 hours before using the sail or storing it away.
4. Sticky Residue Removal:
   • If the coating remains sticky, remove the stickiness with soapy water before storage.
   • Ensure no stickiness remains to avoid damage during storage.

Caution:

• Health Risks: May cause eye and skin irritation. Inhalation may irritate the respiratory tract.
• Avoid Contact: Do not get the product in your eyes, on your skin, or on clothing. Wash thoroughly after handling.
• Ventilation: Use in a well-ventilated area. If odors or exposures exceed acceptable levels, use a NIOSH-approved respirator.

First Aid Information:

• For Eye or Skin Contact:
  Immediately flush with plenty of water for at least 20 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse.

For Spills:

• Cover the spill with absorbent material to prevent runoff. Collect and dispose of waste in accordance with state and federal regulations.

DOT Shipping Information:

• Proper Shipping Name: Resin solution, non-hazardous.
• Hazard Class: Not DOT regulated.
• Identification Number: Not applicable.

Storage and Shelf Life:

• Shelf Life: Use material within 6 months from the date received.
• Storage Conditions: Keep container closed and prevent freezing.

Warnings:

• Keep out of reach of children.
• Excessive inhalation may be harmful.